Unit and connection
- Tank unit or hose unit
- Coupling interface size
- Threaded or flanged connection, depending on the version
Dry Disconnect Couplings
The images are for illustrative purposes and may differ from the final product.
MannTek DDC couplings incorporate valves operated by the coupling and uncoupling motion to minimise product loss. Tank and hose units allow the coupling interface and the equipment connection to be specified separately.

They are the two mating components of the coupling. The tank unit is installed on the tank or pipework; the hose unit couples to it. When replacing a unit, identify the size and configuration of the existing mating unit.
Selectivity uses slots on the tank unit and pins on the hose unit to prevent coupling between incompatible codes. It is intended to prevent accidental product mixing. Available positions depend on coupling size and the required compatibility.
Identify the liquid, concentration where relevant, operating pressure and temperature, and required flow rate. Gather the mating unit reference and the installation connection specification. Include the operating conditions in the request for technical review.
These are separate dimensions. Coupling diameter identifies the interface between the two units; the connection defines the pipe or hose attachment. Check size, thread type or flange standard, and the hose connection where applicable separately.
Selection depends on the transferred product, concentration, temperature and cleaning products. Do not select a seal solely from the fluid name. Chemical compatibility and operating limits must be confirmed for the required construction.
We recommend a cap to protect the coupling interface from dirt and water ingress while disconnected. Continue with recommendation selects the recommended cap for the unit. A dust cap and a pressure-tight sealing cap serve different purposes; confirm which is required for the installation.
No. The RAL colour helps identify the product or line visually. Selectivity is mechanical coding between the two units. If the installation already uses coding, provide the existing RAL reference and selectivity position to retain identification and assembly compatibility.
Non-standard constructions and additional accessories increase the equipment price. Special materials, dimensions, connections and operating requirements can also affect delivery time. The generated specification supports technical review and the quotation; PECTA confirms the price and delivery conditions.
Use Copy link to reopen the technical choices or export the PDF in the final step. You can generate the PDF before entering contact details. The link contains the technical configuration; personal details are not included. Review the specification before submitting a quotation request.
Manufacturer technical documentation: MannTek DDC · MannTek — Selectivity